How to Reset Brother TN660 Toner Counter or Error

How to Reset Brother TN660 Toner Counter or Error

Brother Multifunction Printer (DCP series)

If you have a Brother (DCP series) machine and just replaced your TN660 printer cartridge, you can reset your toner cartridge counter manually by following the instructions below for the following Brother printers.

Brother DCP-L2520 printer          Brother DCP-L2520dw printer

Brother DCP-L2540 printer          Brother DCP-L2540dw printer

  1. Power your printer on
  2. Open front door
  3. Press and hold OK button for a few seconds
  4. Press the START button once
  5. Quickly press + button once then press - button once
  6. Then press OK button
  7. Your TN660 toner is now reset
  8. Close front door
  9. Your Brother printer should be ready to print

Brother Printer (HL series)

If you have a Brother (HL series) machine and just replaced your TN660 printer cartridge, you can reset your toner cartridge counter manually by following the instructions below for the following Brother printers.

Brother HL-L2300          Brother HL-L2300d          Brother HL-L2305dw

Brother HL-L2315dw     Brother HL-L2320            Brother HL-L2320d

Brother HL-L2340dw     Brother HL-L2360            Brother HL-L2360dn

Brother HL-L2360dw     Brother HL-L2380            Brother HL-L2380dw

Brother HL-L2380w       Brother HL-L2700            Brother HL-L2700dw

Brother HL-L2720         Brother HL-L2720dw        Brother HL-L2740

Brother HL-L2740dw

  1. With power on open the front cover
  2. Turn off the printer
  3. Hold the GO button for 3 seconds while turning on the printer
  4. The screen will display “USER MODE”
  5. Press the GO button 9 times
  6. Wifi led light will flash once
  7. Press the GO button 5 times
  8. The TN660 toner counter is now reset
  9. Close the front cover
  10. Printer should be ready to print

Brother Multifunction Printer (MFC series)

If you have a Brother (MFC series) machine and just replaced your TN660 printer cartridge, you can reset your toner cartridge counter manually by following the instructions below for the following Brother printers.

Brother MFC-L2680w         Brother MFC-L2700dw          Brother MFC-L2705dw

Brother MFC-L2707dw       Brother MFC-L2720dw          Brother MFC-L2740dw

  1. Turn the power on
  2. Open the front door
  3. Press and hold the # button for 5 seconds
  4. Toner menu will appear on screen
  5. Select “TNR-HC”
  6. Select YES to reset toner TN660
  7. Close the brother printer door
  8. Your printer should be ready to print
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.